Hair Dryer Temperature Test System is professional instrument in measuring the temperature of the Hair Dryer in working status. It was totally match UL859 International standard. Thermocouple Type:"J" or "K ", 30AWG, Thermocouple Length: 1.2M. It was connected with Temperature Data Logger cambines precision measurement capability with flexible signal connections for your production and development test system. Independent 60 test channels configuratain with temperature sensor function. The operator can install the software to your computer and connect with RS-232/USB socket to measuring the data through the intuitive use interface panel. It is a Windows-based application designed to make easy to use the Temperature Data Logger with your PC for gathering and analyzing measurements. The software is included when you order the product. Use this software to setup your test, acquire and archive measurement data, and perform real-time display and analysis of your incoming measurements. It can 24 hours in auto test until you want to finish the test. It has been use in many famous laboratory in USA, Italy, Holland, Germany, Singapore, England, China, etc. Make your temperature test in easy way now.

The Model: LT-15Ax4 is an equipment for testing the durability of a hair dryer under a simulation. Four samples can be tested by the model LT-15x4 at the same time. Operator can preset the digital counter to the preferred running time before starting. Alarm indicator will be activated for alerting the operator if the testing sample is fail. Test result and data will be showed on the counter.

Voltage input: 120V~240V 50/60Hz 
Four testing working group
Every group work continuously and connect current intermittent
Testing time is adjustable and maximum up to 60 mins 
Fixed rate of current  accessibility helps to prevent short circuit

Heating Wire Winder is a professional type which specially design for manufacture the hair dryer, warm air comb, radiator, etc. It can wind the heating wire became spring type with high efficiency and accuracy. It is control by microprocessor. Total 100% end products and will not waste your heating wire material. Can be wind more than 2000 pcs. heating wire in 8 hours. It is easy to handle for any new user in the production line.

Power Input: 220V AC
Aptitude computer logic winder system
Winder speed: 2000PCs / 8 hours
Winder cycle: 0~9999 Adjustable
100% finished product guarantee
MODEL:
                     

Power Input: 220V AC 
Motor: 1HP 
Winder speed: 0-1400 RPM / Min 
Diameter of fibre tube: 3mm (Max) 
Heating wire diameter: 0.02mm / 49AWG  (Min)
Maximum production speed: 1.4m / Min 
Electronic timing & stable speed 
Machine Synchronization system 
Shockproof & silent fixture installation 

Balance Tester is a equipment helps the  hair-dryer manufacturer in producing quality hair-dryer fan. Since manufactures may meet many problems such as inconsistence size or weight of the hair -dryer  fan  production,  Balance  Tester  helps  checking  out  the problem  of  the  hair - dryer fan  and  maintains  the  quality  and standard eventually in an easy, convenient and efficient way.
MODEL:
               MB-3